Non-Buff Floor Sealer / Finish

  • Description

    This superior sealer / finish is ideal for areas which receive little to no polishing or buffing. Utilizing MPS77 Advanced Technology, WITHSTAND™ provides a dramatic wet-look gloss from fewer coats, with long term gloss retention. Easy to apply; reduces labor costs. Classified by Underwriters Laboratories® for slip resistance.

    Authorized UL Product

    Key Market Information

    Ideal for classrooms or other areas of schools that receive little to no polishing or buffing when classes are in session, September through June.
    Code: 0591
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • TypePure acrylic polymers
    • pH8.5
    • Drying Time (minutes)30
    • ColorWhite
    • OdorAcrylic
    • Film AppearanceClear
    • PowderingNone
    • Flash PointNot available
    • Slip ResistantYes
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Withstand TDS English GHS.pdf Safety Data Sheet WITHSTAND SDS English.pdf Secondary Label Withstand (Undiluted) GHS Secondary Label 6 up.pdf CA Designated List Ingredient Disclosure - Withstand
  • Directions

    Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry. 
    Application: Using a clean mop or applicator apply a thin uniform coats of WITHSTAND™ Non-Buff Floor Sealer / Finish. Allow to dry for a minimum of 20 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area. 
    High Speed Buffing and Burnishing (if desired): WITHSTAND™ Non-Buff Floor Sealer / Finish is an ideal product for use in areas where minimal or no buffing maintenance can be performed. You may, if desired, maintain this product with High Speed polishing or UHS burnishing equipment (electric, battery or propane). Conventional speed maintenance is not recommended. Prior to buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an approved buffing pad. For spray buffing, mop-on or autoscubber restoring use a preferred NCL gloss restorer. 
    Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions. 

  • Features & Benefits

    • High Traffic Applicable
    • Exceptional wear and durability
    • Combination Sealer/Finish reduces product cost
    • Maximum scuff and scratch resistance
    • Reduces labor costs associated with buffing maintenance
  • Video

  • Safety

    Precautionary statement:
    Prevention: Observe good industrial hygiene practices.
    Response: Wash thoroughly after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products