BARE BONES® LOW ODOR

Low Odor All-Purpose Speed Stripper

  • Description

    BARE BONES® LOW ODOR is a superior floor stripping formula that can be used anywhere, anytime! Like the original BARE BONES that set the standard for performance and labor savings some 20 years ago, BARE BONES® LOW ODOR from NCL provides the same rapid penetration and complete removal of even heavily burnished floor finish in a low odor formula that can be used in hospitals, schools and universities and office buildings.

    NCL chemists have designed a wetting system that keeps BARE BONES® LOW ODOR working at maximum effectiveness, with powerful film removing action easily cuts through multiple layers of finish easily! BARE BONES® LOW ODOR is a must for all professional floor care systems.


    Key Market Information

    Healthcare
    The strength of original BARE BONES® LOW ODOR but in a low odor formulation that won't negatively impact patients.
    Code: 1051
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • ColorClear, colorless
    • OdorMild
    • pH11.7
    • Flash PointNot available
    • Upper Cloud Point>130°F
    • Lower Cloud Point< 33°F
    • Viscosity (cps)< 10 cP
    • Water SolubilityComplete
    • Finish RemovalExcellent
    • Damage to Resilient TilesMinimal
    • Density (lbs/gal)8.15 ± 0.1
    • Specific Gravity (g/cc)0.98 ± 0.01
    • Free RinsingYes
    • Low FoamingYes
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Bare Bones Low Odor TDS English GHS.pdf Safety Data Sheet BARE BONES LOW ODOR SDS English.pdf Safety Data Sheet BARE BONES LOW ODOR RTU (1-5, 1-16) SDS English.pdf Secondary Label Bare Bones Low Odor (Diluted 1-5, 1-16) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals bare bones low odor which corner flyer lr.pdf CA Designated List Ingredient Disclosure - BBLO
  • Directions

    Dilute BARE BONES® LOW ODOR following dilution recommendations below. Dilute using cold or mildly warm water only.

    Light/Normal Buildup: 8 oz per gallon of water (1:16)

    Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)

    Mop/Wet Vacuum Stripping System: Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.

    Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.

    Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution.  We recommend that a spot test be conducted before general use.

  • Features & Benefits

    • Low odor
    • No scrubbing machine needed
    • High use-dilution for greater economy
    • Can be used in automatic scrubbers (low foaming)
    • Cuts through multiple layers of finish easily!
    • BARE BONES® LOW ODOR is a must for all professional floor care systems.
  • Video

  • Safety

    DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED. HARMFUL IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
    Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
    Disposal: Dispose of waste and residues in accordance with local authority requirements.
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products