Floor Finish Solubilizer
A unique floor finish re-emulsifier and extra heavy-duty stripper, designed for use in heavy build up areas that have been high speed burnished. Comprised of synergistic solubilizers in combination with emulsifiers, chelating and anti-redeposition agents, and a new type of penetrant in a pH controlled base allow a speed and efficiency never before attainable.Code: 1056Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
- Specific Gravity (gr/cc)1.03 ± 0.01
- Density (lbs/gal)8.72
- Viscosity (cps)< 10 cP
- Flammability (TOC)None
- Upper Cloud>140°F
- Lower Cloud< 34°F
- Finish PenetrationMilky less than 20 seconds
- Wax RemovalExcellent
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Super Purge TDS English GHS.pdf Safety Data Sheet SUPER PURGE SDS English.pdf
Mop/Wet Vacuum Stripping System: Dilute SUPER PURGE™ with cold, hard or soft water for use. The amount of SUPER PURGE™ for each stripping job will depend upon the amount of finish build up on the floor.
Heavy Duty Buildup: 1 part solubilizer to 4 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 8 parts water.
Apply diluted solution of SUPER PURGE™ liberally to the floor, using an area small enough to complete in 20-30 minutes (to avoid drying). Allow SUPER PURGE™ to stand for 5 minutes, then pick up the liquified finish with a squeegee equipped wet vacuum. Repeat this procedure until the floor is completely stripped. Rinse thoroughly with clear water and mop or vacuum dry.
Floor Machine Stripping System:
Heavy Duty Buildup: 1 part solubilizer to 6 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 16 parts water.
Follow the manual directions above, except agitate well with a floor machine equipped with a stripping pad and remove solubilized finish with a wet vacuum and rinse.
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Features & Benefits
- Formulated with extra solubilizers / Liquefied finish stays in stripped solution longer without evaporating too quickly.
- Fast multiple coat penetration / Minimizes stripping time to reduce labor costs
- Removes all build-ups due to repeated burnishing / Allows for reduced product inventory making it a one product process
- pH and odor controlled / Eliminates hazardous vapors and reduces potential tile damage
- Allows stripping without the necessity of a scrubbing machine / Reduces equipment costs and allows the product to be used in small areas where machine scrubbing is impractical.
No Video Available
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.