Penetrating Grout Sealer
Uniquely designed for ceramic tile grouting, this exceptional product repels dirt, oil and water; keeps grout looking bright. A water-based penetrating sealer that repels oil, dirt and moisture from grout. Detergent washable, this product will keep grout looking like new. Does not change the original color of grout. SOIL- LOK™ allows for vapor transmission to prolong grout life. Can be used indoors or outdoors. Mild odor.Code: 2521Packaging: 12 x 32 oz Qt./Case
- Product typeWater-based aqueous solution
- Appearance Translucent Straw-like liquid
- VOC CompliantYes
- Surface penetrationRapid
- Specific Gravity (g/cc)1.00 ± 0.01
- pH8.3 ± 0.5
- Resistance to water-based stainsExcellent
- Ease of applicationSuperior
- UV ResistanceYes
- Vapor transmission through surface Yes
- Drying Time (minutes)30
- Safe on GroutYes
DocumentationTechnical Data Sheet Soil-Lok TDS English GHS.pdf Safety Data Sheet SOIL-LOK SDS English.pdf
Test in an inconspicuous area for suitability prior to application. For new installations, sealer can be applied 48 hours after grouting. Grout joints must be clean, dry and free of existing sealers and coatings.
Apply 1 to 2 coats with a soft-bristle paint brush or sponge paint applicator. Using cotton or paper towels, remove any sealer remaining on the tile within 3 to 5 minutes of application. If 2 coats are applied, allow a minimum of 30 minutes drying time between coats. Ready for surface traffic 2 hours after final coat. Sealed area should be kept dry for 12 hours.
Achieves a full cure in 24 hours. Conduct a test to determine if surface is completely sealed after 2 hours by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.
Coverage: Approx. 1000 lin. Feet per gallon (304m).
Features & Benefits
- Use indoors or outdoors / VOC Compliant
- Easy to apply
- UV resistant
- Rapid surface penetration
- Repels dirt, oil, and moisture from grout
- Allows vapor transmission
- Protects against stains
No Video Available
WARNING: CAUSES EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Wash thoroughly after handling.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage: Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.