Crystallizer Spray N' Buff

  • Description

    ONE STEP™ has been developed as a simple-to-use restoration system for marble, terrazzo and polished limestone floors. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF produces a very high polish. The newly restored surface will resist scuffs and scratches. This restored surface will be very durable. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF dries as you buff and therefore requires no messy clean-up.

    Authorized UL Product

    Code: 2501
    Packaging: 4 x 1 Gal./Case; 12 x 32 oz Qt./Case
  • Specifications

    • Product typeVitrification Compound
    • AppearanceOpaque liquid
    • OdorMild, Bland
    • Specific Gravity (g/cc)1.08 ± 0.01
    • pH (concentrate)2.3 ± 0.2
    • Flash PointNone
    • Safe on StoneYes
    • Scuff ResistanceExcellent
    • Scratch ResistanceExcellent
    • Increased glossOutstanding
    • UL ClassifiedYes
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet One Step TDS English GHS.pdf Safety Data Sheet ONE STEP SDS English.pdf Miscellaneous Documents One Step (Undiluted) GHS Secondary Label 6 up.pdf
  • Directions

    SURFACE PREPARATION: Surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish or other coatings are removed. If there is a coating on the floor, use NCL HURRICANE™ Intensive Stone Cleaner for removal. Rinse surface thoroughly with water and air dry prior to crystallization.

    PLEASE NOTE: Worn out or damaged surfaces may require resurfacing prior to crystallization. Make sure to cover any sensitive surfaces such as metals, glass, carpet, etc. that may be exposed to over-spray.

    APPLICATION: Use a 175 RPM Floor machine designed for crystallization (130 - 180 lb.), equipped with a #0 or #1 grade steel wool pad. Apply ONE STEP™ Crystallizer Spray N’ Buff (with a spray bottle with trigger) at a rate of 2 to 3 squirts per square yard (.836 sq. meter) and immediately buff until surface is completely dry. Buff in both directions until desired gloss is achieved. ONE STEP™ Crystallizer Spray N’ Buff yields approximately 2000-5000 square feet (185 - 465 sq. meters) per gallon of coverage.

    For daily maintenance after re-polishing, use the SCS Daily Maintenance System (PATINA™-HURRICANE™); see the STONE CARE SOLUTIONS™ brochure for more information.

    NOTE: Shake lightly before use.

    CAUTION: Since marble and limestone are a product of nature and their components can vary, they may react differently to this product. For this reason, always test in a small inconspicuous area for adverse reactions.

  • Features & Benefits

    • Dries as you buff / Requires no messy clean-up.
    • Newly restored surface will resist scuffs and scratches.
    • Classified by Underwriters Laboratories for Slip Resistance.
  • Video

  • Safety

    Precautionary statement:
    Prevention: Do not breathe dust or mist. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Use only outdoors or in a well-ventilated area.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products