IMPRESSIONS™

Brilliant Gloss / Ultra Wear Floor Finish

  • Description

    A proprietary blend of synergistic polymers provide uncompromised benefits of immediate wet look gloss and outstanding wearability. Sophisticated integrated components allow for rapid drying, enhanced leveling and superior repairability. This versatile product can be used in many varied environments and maintained with both high & low speed equipment.

    Authorized UL Product

    Code: 0550
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • TypePure acrylic polymers
    • pH8.2 ± 0.3
    • Drying Time (minutes)20-30
    • ColorWhite
    • OdorAcrylic
    • AppearanceClear
    • PowderingNone
    • Flash PointNot available
    • Freeze thaw stableYes (3 Freeze Thaw Cycles)
    • Detergent ResistantYes
    • Multi-Speed BuffingYes
    • LevelingExcellent
    • Black Mark ResistantSuperior
    • Scuff ResistanceSuperior
    • Soil ResistanceSuperior
    • DurabilityExcellent
    • RecoatabilityExcellent
    • RemovabilityExcellent
    • Immediate Wet Look GlossOutstanding
    • Slip ResistantYes
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Impressions TDS English GHS.pdf Safety Data Sheet IMPRESSIONS SDS English.pdf
  • Directions

    Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.

    Application: Using a clean mop or applicator apply thin uniform coats of IMPRESSIONS™ Brilliant Gloss / Ultra Wear Floor Finish. Allow to dry for a minimum of 20 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.

    High Speed Buffing and Burnishing: IMPRESSIONS™ Brilliant Gloss / Ultra Wear Floor Finish is an ideal product for use with high speed polishing or burnishing machines of 1000 rpm or higher. Prior to buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an NCL Aqua Magic buffing pad.

    For spray buffing, mop-on or autoscubber restoring use a prefered NCL gloss restorer. Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.

  • Features & Benefits

    • Very hard wear surface / Extremely scuff resistant
    • Enhanced leveling; repairs easily / Usable by any personnel in many applications
    • Super brilliant gloss / Maximizes appearance & user appeal
    • Fast drying / Allows faster re-coating and less waiting
    • Pure thermoplastic polymers / Very responsive to multi-speed polishing
  • Video

    No Video Available

  • Safety

    KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Observe good industrial hygiene practices.
    Response: Wash thoroughly after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products