GRANITE STAR™

Crystallizer Spray N' Buff

  • Description

    GRANITE STAR™ Granite Crystallizer Spray N’ Buff is a breakthrough technology formulation that allows you to maintain polished granite surfaces as easily as spray buffing your floors. It brightens the color of any granite surface; GRANITE STAR™ is even effective on black granite. Easy-to-use; just spray and buff. Saves a minimum of 40% in labor costs for granite polishing when compared with the use of diamonds.

    Code: 2525
    Packaging: 4 x 1 Gal./Case
  • Specifications

    • AppearanceBlue/Green, Opaque Liquid
    • OdorMild, Bland
    • Flash Point (°F TOC)None to Boiling
    • Granite polishing performanceExcellent
    • Boiling Point (°F)212
    • Solubility In WaterDisperses
    • Viscosity (cps)Water Thin
    • Specific Gravity (g/cc)1.16 ± 0.01
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Granite Star TDS English GHS.pdf Safety Data Sheet GRANITE STAR SDS English.pdf Miscellaneous Documents Granite Star (Undiluted) GHS Secondary Label 6 up.pdf
  • Directions

    SURFACE PREPARATION: Surface must be clean, dry and must be free of any grease, oil or floor finish. If there is a finish on the floor, use NCL HURRICANE Intensive Stone Cleaner for removal. Rinse the surface thoroughly with water and dry prior to polishing.

    NOTE: Heavily worn surfaces may require diamond finishing. Be sure to cover any adjacent areas such as metal, carpet or wood that may be sensitive to any over-spray.

    APPLICATION:
    NOTE: Product may separate; must shake well before use.
    Use a weighted NCL Stone Blazer Machine (should be a minimum of 150 pounds (68 Kilograms).

    Test in an inconspicuous location for proper weight. Use an NCL STEEL FORCE #0 Steel Wool Pad. Work in a 9 square foot area (approx. 1 Sq. Meter). Use a trigger sprayer to apply 1 spray of the product to each square foot (.1 Sq. Meters) of granite. It may be necessary to spray out more product depending on the stone and the general condition of the floor. Buff slowly until dry. Repeat 2 or 3 times until desired shine is obtained.

    COVERAGE: The coverage will depend on the type of granite and the wear level. The coverage will be 2000-5000 square feet (186-465 Sq. Meters) per gallon of product.

    CAUTION: Since granite is a product of nature its properties can vary, always test in an inconspicuous area for suitability.

  • Features & Benefits

    • Breakthrough technology formulation
    • Maintain polished granite surfaces as easily as spray buffing your floors
    • Brightens the color of any granite surface
    • Effective on black granite
  • Video

    No Video Available

  • Safety

    DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. HARMFUL IF SWALLOWED. SWALLOWED. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Do not breathe mist or vapor. Wear protective gloves/protective clothing/eye protection/face protection. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    Storage: Store locked up.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products