Acrylic Sealer & Undercoater
An all acrylic, water emulsion sealer that protects floor surfaces from water, dirt and abrasive wear. This product provides floor maintenance cost savings by eliminating frequent strippings and re-coatings. This pure acrylic brilliant primer is produced in high pressure reactors using proprietary designed polymer emulsions, interacted plasticizers, leveling aids, antifoam agents and deionized water to insure maximum performance.Code: 0504Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
- Re-coat45 minutes
- Volatile hydrocarbon solventsNone
- Drying time (minutes)20
- Color of dried filmWhite
- Color of liquidWhite
- Coverage (sq. ft. / gal)1st coat 1500 - 1800
- 2nd coat 1800 - 2000
- Flash pointNot available
- Viscosity (cps)< 10 cP
- Sediment (%)< 0.05
- Density (lbs/gal)8.5 ± 0.1
- Specific gravity (g/cc)1.02 ± 0.01
DocumentationTechnical Data Sheet Enseel TDS English GHS.pdf Safety Data Sheet ENSEEL SDS English.pdf
Floor Preparation: Strip floor thoroughly with your preferred NCL floor stripper, making sure that all old film is removed. Rinse completely and allow to dry.
Application of Sealer: Using a clean string mop or applicator, apply a thin even coat of ENSEEL™ Acrylic Sealer and allow to dry for at least 30 minutes. On very porous floors apply a thick coat and allow to soak 5 minutes. Pick up excess, if any, before ENSEEL™ Acrylic Sealer begins to dry. To increase the appearance of the surface a second coat may be applied. After ENSEEL™ Acrylic Sealer has been allowed to completely cure, apply the recommended NCL Floor Finish following recommendations on product label.
Features & Benefits
- Tough wear surface / Long lasting protection
- Water-based / No dangerous fumes
- Fast drying / Less waiting time
- Designed for ease of application / May be applied by any personnel without extensive training
- All acrylic formulation / Can be stripped easily
No Video Available
KEEP OUT OF THE REACH OF CHILDREN
Prevention: Observe good industrial hygiene practices.
Response: Wash thoroughly after handling.
Storage: Store away from incompatible materials.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.e.com