EARTH SENSE® ASPIRE™
Metal-Free Floor Finish / Sealer
ASPIRE™ Metal-Free Floor Sealer/Finish is a technologically advanced “non-zinc” Sealer/Finish. It produces an immediate wet-look gloss and is buffable with a 330 - 2000 RPM equipment for long lasting beauty and performance. This environmentally responsible formulation meets the Green Seal Standard for Industrial and Institutional Floor-Care Products (GS-40).
ASPIRE™ Metal-Free Floor Sealer/Finish is recommended for use in Federal, State and Local Government Offices, Military Bases, Municipal Facilities, Day Care Centers, Hospitals, Nursing Homes, Office Buildings, Parks and Recreation Centers, Schools, Universities, Hotels, Lodging and any facility sensitive to environmental and human health characteristics.
This product meets Green Seal™ Standard GS-40 based on effective performance and protective limits on VOCs and human & environmental toxicity. GreenSeal.org.
Floor Coating and Finishing Material - As to Slip Resistance Only - 18EL
Authorized UL ProductCode: 0555Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
- AppearanceClear Liquid
- Specific Gravity (g/cc)1.02 ± 0.01
- Density (lbs/gal)8.9 ± 0.1
- Flash PointNot available
- pH (Concentrate)7.8
- Environmentally ResponsibleYes
- Nonylphenol EthoxylatesNone
DocumentationTechnical Data Sheet ES ASPIRE GHS TDS English.pdf Safety Data Sheet ES ASPIRE SDS English.pdf Miscellaneous Documents Aspire (Undiluted) GHS Secondary Label 6 up.pdf
Initial Floor Preparation: Completely remove the existing floor coating using recommended products. When starting an “environmentally responsible program” it is important to start with a bare floor. Make sure that the floor is clean and completely dry.
Application: Using a clean mop or applicator apply a thin uniform coat of Earth Sense® ASPIRE™ Metal Free Floor Sealer / Finish. Allow to dry for a minimum of 30 minutes after each coat. Do not apply more than 4 coats in a 24 hour period.
High Speed Buffing and Burnishing: This is an ideal product for use with any speed polishing or burnishing equipment (electric, battery or propane). For high speed buffing or UHS burnishing / restoration, use an NCL AQUA MAGIC™ Buffing Pad with POP & SHINE™ Gloss Restorer.
Maintenance: Maintain by dust mopping daily using mop treated with CONTROL™ Dust Mop Treatment. Damp mop or clean with an automatic scrubber as required, using Earth Sense® #16 pH NEUTRAL ALL-PURPOSE CLEANER. Stripping: When stripping becomes necessary use a compatible Green Seal™ Certified NCL Earth Sense® Stripper following directions of the product label.
Features & Benefits
- Environmentally responsible / Made with no harsh caustics or solvents
- Ingredients are readily biodegradable / Safe for workers using the product
- Made with Naturally-Derived Surfactants / Less impact on the environment.
- Effectively removes organic soils and mineral deposits from restroom surfaces / Maximizes labor
KEEP OUT OF THE REACH OF CHILDREN
Prevention: Observe good industrial hygiene practices.
Response: Wash thoroughly after handling.
Storage: Store away from incompatible materials.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.