Non-Butyl Cleaner / Degreaser
A revolutionary industrial strength degreaser cleaner based on the newest detergent penetrants and grease solubilizers. This product utilizes high speed degreasing emulsifiers, a complex detergent system, followed with anti-re-soiling agents, corrosion inhibitors, carbon removers, scum removers, and odorless wax removers to produce the most complex, complete, non-butyl degreaser cleaner available.
Key Market Information
IndustrialNon-butyl degreaser cleaner versatile enough to be a go-to solution for multiple industrial environments. Quickly cut through animal fats in food service and processing environments. Effectively clean away greases in industrial environments. Wipe away dirts and soils in just about any environment. Non-corrosive, non-butyl formula will be appreciated by your cleaning staff.
Building Service ContractorsNon-butyl degreaser cleaner versatile enough to be a go-to solution for building service contractors. Excellent for removing heavy grease, oils, stains, inks, soot, waxes, floor finish, mildew, scum, tar, lipstick, road film, soap film, wet paint, creosote, smoke stains, food residues, rubber burns, crayon and pencil marks, and other stubborn soils.Code: 1040Packaging: 55 Gal. Drum; 4 x 1 Gal./Case
- OdorMild, pleasant
- pH (Concentrate)13.3
- pH (1:30)12.3 ± 0.2
- Foam HeightControlled
- SolubilityComplete in water
- Specific Gravity (g/cc)1.05 ± 0.01
- Density (lbs/gal)8.7 ± 0.1
- Viscosity (cps)<10 cP
- Flash PointNot available
- High Temp. Cloud>135°F
- Low Temp. Cloud< 32°F
- Freeze-Thaw StableYes
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Bullseye TDS English GHS.pdf Safety Data Sheet BULLSEYE SDS English.pdf Safety Data Sheet BULLSEYE RTU (1-3, 1-12) SDS English.pdf Safety Data Sheet BULLSEYE RTU (1-30, 1-128) SDS English.pdf Secondary Label Bullseye (Diluted 1-3, 1-12) GHS Secondary Label 6 up.pdf Secondary Label Bullseye (Diluted 1-30, 1-128) GHS Secondary Label 6 up.pdf
For light cleaning and degreasing: dilute 1-2 oz. of BULLSEYE™ per gallon of water.
For moderate greases and soils: dilute 4-8 oz. of BULLSEYE™ per gallon of water.
For heavy grease removal: dilute 16 oz. of BULLSEYE™ per gallon of water.
Apply to surface by mop, sponge or spray. Agitate if necessary; rinse and allow to dry.
For Food Contact Surfaces: Rinse thoroughly with potable water before re-use.
Refer to the handy dilution chart below as a guideline for specific applications:
For Cleaning Resilient and Non-Resilient Floors, Walls, Building Exteriors, Plastics and Vinyl Upholstery, and Automotive: 1 oz. per gallon (1:128)
For Wax Stripping, Trucks, Metal Cleaning, Pre-Paint Cleaning: 10 oz. per gallon (1:12)
For Bath, Shower, and Locker Room Facilities: 4 oz. per gallon (1:30)
For Food Processing Applications, Machine and Automotive Shops, and other Very Heavy Duty Degreasing: 40 oz. per gallon (1:3)
Features & Benefits
- Multiple applications / Designed for use by hand, mechanical, pressure, steam and auto scrubbers.
- Metal-safe non-corrosive formula / Can be used on all ferrous and non-ferrous surfaces
- Free rinsing / Will not leave a residue
- Super concentrate / Allows for economical dilution for all cleaning and degreasing applications
- Non-butyl, non-VOC solvent
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Keep container tightly closed. Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.