BOLT™

Ultra Concentrated No-Rinse Speed Stripper

  • Description

    BOLT™ is an ultra concentrated formula that quickly penetrates and removes even extreme floor finish build-up. Excellent wetting and slow drying features save time and labor. Compared to leading floor strippers BOLT™ is 2 to 4 times more active. It contains no caustics, and does not require a neutralizing flood rinse.

    Key Market Information

    Healthcare
    Lightning fast speed to finish the job quickly with low odor for patient/resident acceptance.
    Code: 1069
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case; 12 x 32 oz Qt/Cs

  • Specifications

    • ColorPale Straw
    • OdorSassafras
    • pH12.8
    • Upper Cloud Point>130°F
    • Lower Cloud Point< 33°F
    • Viscosity (cps)< 10 cP
    • Water SolubilityComplete
    • Finish RemovalExcellent
    • Damage to Resilient TilesMinimal
    • Density (lbs/gal)7.9 ± 0.1
    • Specific Gravity (g/cc)0.95 ± 0.01
    • Free RinsingYes
    • Low FoamingYes
    • Shelf Life1 year minimum in original unopened container

  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Bolt TDS English GHS.pdf Safety Data Sheet BOLT SDS English.pdf Product Flyers, Brochures, and Equipment Manuals Bolt Flyer.pdf CA Designated List Ingredient Disclosure - Bolt

  • Directions

    Follow dilution recommendations. Dilute using cold water only.

    Light/Normal Buildup: 4 oz per gallon of water (1:32)
    Heavy Buildup (Burnished): 16 oz per gallon of water (1:8).  

    Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old liquified finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.

    Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution.  We recommend that a spot test be conducted before general use.

  • Features & Benefits

    • Ultra concentrated / Lightning Fast Stripping Performance
    • Superb wetting system/ Remains wet longer to eliminate extra work.
    • Requires no flood rinse or neutralization step / Saves time by eliminating neutralizing and rinsing
    • Low odor formula / For use in virtually any situation.
    • Low foaming / Easy clean-up with automatic scrubbers and wet vacuums.

  • Video

  • Safety

    DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED, IN CONTACT WITH SKIN OR IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Do not breathe mist or vapor. Use only in well-ventilated areas. Wear protective gloves/clothing and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Keep out of reach of children.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    Storage: Store locked up. Store in a well-ventilated place. Keep cool.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products

Extended Performance Floor Finish

Soil and Floor Finish Build-Up Remover

Ultra High Speed Kleen & Burnish

Bolt 5 gal.jpg