VIVID™

Interactive Floor Finish Laminator & Maintainer

  • Description

    An interactive blend of cleaners, penetrants, gloss enhancers and moisturizers that laminate the floor finish surface to provide maximum gloss, flexibility and durability. This versatile product can be used by mop-on restoration method, spray buffing or through an auto scrubber. Outstanding gloss and durability are the hallmark of this unique maintainer.

    Authorized UL Product


    Key Market Information

    Code: 0528 (bulk liquid packaging), 0529 (quart)
    Packaging: 4 x 1 Gal./Case; 12 x 32 oz Qt./Case
  • Specifications

    • TypeBlended emulsifiers
    • pH9.5
    • Drying Time (minutes)10-20
    • ColorWhite
    • OdorCitrus
    • Film AppearanceClear
    • PowderingNone
    • Flash PointNot relevant
    • Slip ResistantYes
    • Freeze thaw stableYes (3 Freeze Thaw Cycles)
    • Detergent ResistantYes
    • LaminationExcellent
    • LevelingExcellent
    • Black Mark ResistantSuperior
    • Scuff ResistanceSuperior
    • Soil ResistanceSuperior
    • DurabilityExcellent
    • RecoatabilityExcellent
    • RemovabilityExcellent
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Vivid TDS English GHS.pdf Safety Data Sheet VIVID SDS English.pdf Secondary Label Vivid (Diluted 1-4, 1-16) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure
  • Directions

    Preparation of Floors: The floor surface must contain a base wear coat of 4 to 6 coats of a proven compatible thermoplastic floor finish which has been allowed to cure for a minimum of 24 hours. Prior to application of VIVID™ the floor should be cleaned and allowed to dry thoroughly.

    Application for Mop-On Restoration: Dilute one part VIVID™ with 4 parts of clean cool water into a clean wringer bucket, mixing completely. Apply VIVID™ solution using a clean mop, wringing the mop only hard enough so that the solution is not dripping. Apply evenly to the floor, allow to dry, then burnish.

    Application for Spray Buffing: Apply concentrated VIVID™ in a very light mist to a small area directly in the path of the floor machine, and immediately buff to a high gloss. Apply a heavier mist of on black heel marks or heavily worn areas and burnish.

    Application for Auto-Scrubber Restoration: Dilute 8 oz. of VIVID™ with each gallon of clean cool water in an auto-scrubber equipped with recommended floor pads. Apply solution, single or double scrub, pick up solution, allow to dry, then burnish.

  • Features & Benefits

    • Contains proprietary gloss enhancers
    • Laminates floor finish surface & provides maximum gloss
    • Contains moisturizers
    • Enhances floor finish flexibility & repairability
    • Cleans, moisturizes & repairs in 1 step
    • Labor & material savings
    • Multi-purpose formula
    • Use by mopping, spraying or with automatic scrubber
    • Adds plasticizers to the floor finish
    • Restores elasticity and eliminates build-up associated with other restoration methods
  • Video

  • Safety

    KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Observe good industrial hygiene practices.
    Response: Wash hands after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of waste and residues in accordance with local authority requirements.
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products