TWISTER™

Mineral Deposit / Cement Film Remover

  • Description

    TWISTER™ is a highly concentrated, fast acting, acid based cleaner for use on textured granite and other non-polished natural stones as well as unglazed ceramics. TWISTER™ removes grout and mortar residues, lime and hard water mineral deposits, efflorescence, surface rust and heavy construction dirt.


    Key Market Information

    Code: 2517
    Packaging: 4 x 1 Gal./Case
  • Specifications

    • Product typeAcid based mineral deposit/cement film remover
    • AppearanceClear
    • OdorMild
    • Specific Gravity (gr/cc)1.031 ± 0.2
    • pH (in dilution)< 1.0
    • Solubility in waterComplete
    • Safe on granite surfacesYes
    • Safe on non-calcium stone surfacesYes
    • Flash PointNone
    • Cleaning PerformanceExcellent
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Twister TDS English GHS.pdf Safety Data Sheet TWISTER SDS English.pdf Safety Data Sheet TWISTER RTU (1-5) SDS English.pdf Secondary Label Twister (Diluted 1-5) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals World Class Stone Care Solutions Brochure.pdf
  • Directions

    Protect all adjacent non-masonry and polished stone surfaces. Wet area to be cleaned with clean water prior to any application of this product. Dilute 1 part TWISTER™ with 5 parts of cool to warm water (a higher dilution may be required for heavy concentrations of mineral deposits and efflorescence). Apply diluted solution to the wet surface and agitate vigorously with a stiff bristle brush or natural fiber buffing pad. Allow 5 minutes dwell time and rinse well with clean water. Continue to rinse until all the solution has been removed.

    COVERAGE: 800 to 1,000 sq. ft. per gallon

    NOTES:
    THIS PRODUCT IS NOT FOR USE ON POLISHED MARBLE, LIMESTONE, TERRAZZO, TRAVERTINE OR ANY OTHER CALCIUM CONTAINING POLISHED STONE.

    Always dilute with water, this product is not intended for use full strength.

    Contains Hydrochloric Acid and may cause corrosion on some metal surfaces.

    Test for suitability and appropriate dilution in a small inconspicuous area prior to general use.

  • Features & Benefits

    • Highly Concentrated / Economical
    • Fast Acting / Removes: grout & mortar residue, lime & hard water mineral deposits, efflorescence, surface rust, and construction dirt
    • Use on textured granite, unglazed ceramics, and other non-polished stone surfaces
  • Video

  • Safety

    DANGER: MAY BE CORROSIVE TO METALS. CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement: 
    Prevention: Keep only in original container. Use only in a well-ventilated area. Do not breathe mist or vapor. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
    Storage: Store locked up. Store in corrosive resistant container with a resistant inner liner
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products