EARTH SENSE® GREEN IMPACT™
Rinse-Free Speed Stripper
GREEN IMPACT™ Stripper is a fast-acting speed stripper. This environmentally responsible formulation meets the Green Seal™ Standard for Industrial and Institutional Floor -Care Products (GS-40) and has been certified along with companion Green Seal™ Certified floor finishes.
GREEN IMPACT™ Stripper and companion Green Seal™ Certified Earth Sense® Floor Finishes are recommended for use in Federal, State and Local Government Offices, Military Bases, Municipal Facilities, Day Care Centers, Hospitals, Nursing Homes, Office Buildings, Parks and Recreation Centers, Schools, Universities, Hotels, Lodging and any facility sensitive to environmental and human health characteristics.
This product meets Green Seal™ Standard GS-40 based on effective performance and protective limits on VOCs and human & environmental toxicity. GreenSeal.orgCode: 1053Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
- OdorMild aromatic
- pH (as is)10.0
- pH (In dilution 1:5)9.8 ± 0.3
- pH (In dilution 1:16)9.7 ± 0.3
- Specific Gravity (g/cc)1.01 ± 0.01
- Lower Cloud Point< 33°F
- Upper Cloud Point>130°F
- Viscosity (cps)< 10 cP
- Water SolubilityComplete
- Free RinsingYes
- Low OdorYes
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Green Impact TDS English GHS.pdf Safety Data Sheet ES GREEN IMPACT SDS English.pdf Safety Data Sheet ES GREEN IMPACT (Diluted 1-16) SDS English.pdf
Mop/Wet Vacuum Stripping System: Dilute GREEN IMPACT™ using cold water according to the dilution chart below. Apply liberally with a mop to small area and allow to stand for 3 to 5 minutes. Add water to the floor as necessary to keep the floor from drying. Agitate with a mop and pick-up solution and old finish with a wet vacuum. Rinse as necessary. Allow floor to dry completely.
Floor Machine Stripping System: Dilute GREEN IMPACT™ using cold water according to the dilution chart below. GREEN IMPACT™ may be applied with a mop or Automatic Scrubber. Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Pick-up solution and old finish with a wet vacuum. Rinse as necessary. Allow floor to dry completely.
Mop/Wet Vac (Heavy Build-Up): 64 OZ./GAL (1:2)
Mop/Wet Vac (Normal Build-Up): 25 OZ./GAL (1:5)
Floor Machine Stripping (Heavy Build-Up): 25 OZ./GAL (1:5)
Floor Machine Stripping (Normal Build-Up): 8 OZ./GAL (1:16)
Finish Application: When applying finish use a compatible Green Seal™ Certified NCL Earth Sense® Floor Finish following directions of the product label.
Features & Benefits
- Non-toxic, non-flammable, non-caustic, environmentally responsible formula.
- No phosphates, no butyl (2-Butoxyethanol*), no NPE or APE surfactants, no free alkali, no added fragrances.
- Powerful, yet low odor formulation is excellent for use in health care facilities, nursing homes, any area where objectionable odors present a problem.
- Concentrated formula for economical in-use-dilution costs.
WARNING: CAUSES SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Wash thoroughly after handling. Wear eye/face protection.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage: Store away from incompatible materials.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.